Qlogic QLA2340 Single Port PCI-X Optical Fiber Channel Adapter Used System Pull OEMXS # 4948

Qlogic QLA2340 Single Port PCI-X Optical Fiber Channel Adapter Used System Pull OEMXS # 4948

  • Call For Price

    Condition: Used System Pull

      • Product Code: QLA2340
      • Availability: Out Of Stock

      Product Essentials

      Designed and deployed by major server and storage OEMs, the QLogic SANblade QLA2340 and QLA2340L host bus adapters (HBAs) offer the ultimate in performance: 2-Gbps Fibre Channel combined with 64-bit, 133-MHz PCI-X. Eliminating traditional host bottlenecks that impede the high performance of 2-Gbps Fibre Channel, this union of the fastest I/O and host technologies creates the perfect balanced solution. These HBAs are based on unique single chip fibre channel controller architecture from QLogic. These multimode optic HBAs are specifically designed for servers in direct attach storage (DAS) as well as storage area network (SAN) environments.

      Speed 64-bit, 133-MHz PCI-X
      Signal voltage 3.3 V and 5.0 V buses supported
      Compliance PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification rev. 1.0, PCI Bus Power Management Interface Specification rev 1.1
       
      Fibre Channel Specifications


      Speed 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex
      Topology FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
      Buffer credits For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued.
      Class of service Class 3 Fibre Channel service
      Protocols SCSI-FCP, IP, FC-TAPE
      Compliance Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)

      Physical Specifications


      Ports One
      Media Multimode optic
      Optics Short wave laser
      Connectors LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module
      Form factor Low-profile MD2: 16.93 cm×5.15 cm (6.7"×2.5")
      Bracket size QLA2340: standard size

      Environment and Equipment Specifications


      Temperature Operating 0°C/32°F to 55°C/131°F. Storage: –20°C/–4°F to 70°C/158°F
      Airflow 0 lf/m
      Humidity Relative (noncondensing) 10% to 90%, Storage: 5% to 95%
      Power dissipation ~ 7.0 watts
      Cable 50/125μm multimode fiber, 62.5/125 μm multimode fiber
      Cable distances 1 Gbps 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber 2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber