Essentials

The Intel Entry Server Board SE7230NH1-E (LX Version) supports the following feature set:

Processor and Front Side Bus (FSB) support.

Supports Pentium processor Extreme Edition, Pentium D, Pentium 4 and

Celeron D processors in the Intel LGA775 package

Supports Intel Dual Core Architecture

Supports Hyper-Threading Technology

Supports Intel Extended Memory System 64 Technology (Intel EM64T)

Intel E7230 Chipset components

Intel E7230 MCH Memory Controller Hub

Intel ICH7R I/O Controller

12-deep In-order Queue

Memory System

Four DIMM sockets supporting 400/533/667MHz DDR2 DIMMs

Data bandwidth per channel of 4.2GB/s or 8.4GB/s in dual channel when using DDR2

667MHz

Support for up to two DDR2 channels for a total of four DIMMs (2 DIMMs / Channel)

providing up to 8GB max memory capacity.

Support for 256MB, 512MB, 1GB and 2GB DRAM modules

I/O Subsystem

LX Board I/O Subsystem (Five independent PCI Buses):

Segment A: Two PCI 32-bit/33-MHz 3.3V Universal connectors supporting full length

PCI add-in cards (Adapters which support 5V only are not supported) and one

embedded Intel® 10/100/1000 82541PI Gigabit Ethernet Controller (Supports PCI

Specification, Rev 2.3)

Segment B: One x1 PCI Express* resource implemented as an embedded Intel®

10/100/1000 82573E/V gigabit Ethernet Controller

Segment C: One x1 PCI Express* resource implemented as a single x4 PCI

Express* connector supporting x1/x2/x4 PCI Express* add-in cards

Segment D: One x4 PCI Express* resource supporting PXH-V-V PCI-X Hub. PXH-VV

supports one dedicated PCI-X* 64/100MHz slot and PCI-X portion of Intel

Adaptive Slot

Segment E: One x8 PCI Express* resource supporting PCI Express* portion of Intel

Adaptive Slot. Supports x1/x2/x4/x8 PCI Express* add-in cards via riser card

Express* connector supporting x1/x2/x4/x8 PCI Express* add-in cards

Serial ATA host controller

Four independent SATA ports support data transfer rates up to 3.0 Gb/s (300MB/s) per port

IDE controller

One IDE connector, supporting a maximum of two ATA-100* compatible devices

Universal Serial Bus 2.0 (USB)

Two external USB ports with an additional internal header providing two optional USB

ports for front panel support.

Supports wake-up from sleeping states S1-S4 (S3 not supported)

Supports Legacy Keyboard/Mouse connections when using PS2-USB dongle

LPC (Low Pin Count) bus segment with one embedded device

Super I/O controller chips providing all PC-compatible I/O (floppy, serial, keyboard,

mouse, two serial com port ) and integrated hardware monitoring

LX Super I/O = National Semiconductor* PC8374LOIBU

SSI-compliant connectors for SSI interface support

Standard Intel 34pin SSI front panel and 2x12 and 2x4 power connectors

Fan Support

Two general purpose 3-pin fans

Two general purpose 4-pin fans

One 4-pin processor fan (active heatsink required)